DN40~DN200 ANSI Standard Stainless Steel y-type Strainer Drain
Valve for Oil
Specifications:
Material: 304 stainless steel
Thread size: 3/4"DN20 PT
Size: 8 * 7 * 3.5cm / 3.15 * 2.76 * 1.38in
Weight: 343g
| Description |
| Product Name | Y type female thread strainer |
| Modle | GY11W-16P |
| Nominal diameter(DN)mm | 1/2-4" |
| Working pressure | 800WOG |
| Mesh | CF8M ,CF8,WCB |
| Design standard | DIN .APL.GB |
| Body | stainless steel |
| Gasket | PTFE/RPTFE |
| Applicable Media | Water,Oil,Gas and Corrosive Liquid |
| Temperature Applicable | (-30°C-280°C) |
| Material | SS316 .SS304 . |
| Threaded standard | NPT /BSPT /BSP /DIN |
| End connection | Threaded |
| Driven mode | Manual |
Y Strainer Design
As it's name implies, a Y strainer is shaped like a “Y” and is used
to filter, or strain, out particulates
from steam, gas or liquid. This mechanical straining process is
made possible via a filter element comprised
of mesh, perforated metal, or a wedge wire straining element. The
most common kind of straining element is
a wire mesh. Some also include “blow-off valves” that make the
cleaning process easier in applications with more
substantial dirt blowing. The strainer itself has a compact, Y
shaped design. The Y shape has better flow characteristics
than for example a T shaped strainer, because the fluid flows
through the filter with less change of direction.
Why Use a Y Strainer?
In general, Y strainers are critical anywhere clean fluids are
required. While clean fluids can help maximize the reliability
and lifespan of any mechanical system, they're especially important
with solenoid valves. This is because solenoid valves
are very sensitive to dirt and will only function properly with
clean liquids or air. If any solids enter the stream, it can
disrupt
and even damage the entire system. Therefore, a Y strainer is a
great complimentary component. In addition to protecting
the performance of solenoid valves, they also help safeguard other
types of mechanical equipment, including:
Pumps
Turbines
Spray nozzles
Heat exchangers
Condensers
Steam traps
Meters
A simple Y strainer can keep these components, which are some of
the most valuable and expensive parts of the
pipeline, protected from the presences of pipe scale, rust,
sediment or any other kind of extraneous debris.
Y strainers are available in a myriad of designs (and connection
types) that can accommodate any industry or application.
Features:
- PRACTICALITY:Adopt stainless steel double layers mesh structure, strong and
durable, low flow resistance, easy to discharge, large amount of
pollution and so on
- UNIQUE DESIGN:The body material is stainless steel and is mainly used in small
diameter pipe equipment
- EASY TO INSTALL:Easy to install and disassemble, reliable discharge performance
- MATERIAL:It is mainly used in water, steam and other media, convenient to
use and maintain
- GREAT CHIOCE:It is an indispensable device for the piping system of conveying
medium, usually installed in the inlet end of pressure reducing
valve, relief valve and fixed water level valve
What is the difference between strainer and filter?
The key difference between strainers and filters are the size of
the particles they remove. Strainers typically remove larger
particles that are visible in a liquid or gas, while filters remove
contaminants that are often so small, they cannot be seen with the
naked eye.
What are the different types of strainers?
There are 4 common types of strainers used for oil and gas
filtration. They are simplex strainers, y strainers, duplex
strainers, and automatic strainers. Each different type of strainer
has its own advantages when being used.
Packing Details:
We choose suitable wood cases according to different valves and
arrange skilled workers to pack in case of bruise. Long term
cooperated forwarder will book space, clear customs and transport
for us without delay. There are three ways for transportation, by
sea, by air and by train. We will arrange transportation according
to customers' needs.
Delivery Details: According to the order, 7~60days
