| BODY MATERIALS:As the body is internally fully rubber lined, the
body material is protected from corrosion by the medium. |
| Type of material | Material standard | Example for application |
| Ductile iron | GGG40, DIN 1693 | General application. |
| 60-40-18,ASTM A536 |
| 400-18, BS 2789 |
| Ductile iron(Heat treated) | GGG40.3 DIN 1693 | Heavy applications, Cold applications, petrochemical industries,
power stations, alternative for cast steel |
| Cast stainless steel | CF8, ASTM A351 | Medicine, food, drink |
| CF8M, ASTM A351 |
| Bronze | C-CuSn10Zn, DIN 1705(RG10) | Marine service |
| C90500, ASTM B584 |
| LG1, BS 1400 |
| | | |
| DISC MATERIALS:As the disc is in direct contact with medium, the
material should be carefully selected |
| Type of material | Material standard | Example for application |
| Ductile iron nickel plated | GGG40, DIN 1693 | Air, non corrosive hot or cold water |
| 60-40-18,ASTM A536 |
| 400-18, BS 2789 |
| Ductile iron nylon coated | GGG40, DIN 1693 | Potable water, water(max. 70°C, PH value between 4.5 and 9) |
| 60-40-18,ASTM A536 |
| 400-18, BS 2789 |
| 400-18, BS 2789 |
| Ductile iron, PTFE coated | GGG40, DIN 1693 | Acids, alkalis, oil, water, air |
| 60-40-18,ASTM A536 |
| 400-18, BS 2789 |
| Cast stainless steel | CF8M, ASTM A351 | Potable water, demineralized water, solvents, industrial water, not
recommended for sea water, gas |
| Duplex stainless steel | 1.4462, EN 10088 | Potable water, cooling water, sea water, demineralized water,
solvents, foodstuff |
| A181, Grade F51 |
| Aluminum bronze | G-CuAl10Ni, DIN 1714 | Sea water, potable water, gas |
| C99500, ASTM B148 |
| AB2, BS 1400 |
| Hastelloy-C | A494, CW-12MW | Phosphoric, hypochloric, acetic, formic, sulfurous |
| | | |
| SHAFT MATERIALS: | Materials for shafts are selected on the basic of disc materials |
| Type of material | Material standard | in combination with disc materials |
| Stainless steel | SS410 | Stainless steel, ductile iron |
| High strength stainless steel | 1Cr17Ni2 | Stainless steel, ductile iron |
| ASTM A431 |
| Stainless steel | SS316 | Stainless steel, ductile iron, aluminum bronze |
| Aluminum bronze | CuA10Ni5Fe4, DIN 17665 | Aluminum bronze |
| C63000, ASTM B150 |
| Monel | NA18, BS 3076 | Aluminum bronze(high pressure application) |
| Hastelloy C276 | ASTM B574, N10276 | Hastelloy-C |
| | | |
| | | |
| Type of material | Material standard | Temp.range | Example for application |
| Nitrile rubber | NBR | 0°C~90°C | Aliphatic hydrocarbons(fuels, low aromatic containing oils,
gasses), sea water, compressed air, powders, granular, vacuum, gas
supply |
|
| Ethylene-propylene rubber | EPDM | -20°C~110°C | Water in general (hot-, cold-, sea-, ozone-, swimming-,
industrial-, etc). Weak acids, weak salt solutions, alcohols,
ketones, sour gasses, sugar juice |
|
| Special ethylene-propylene rubber | Special EPDM | -10°C~70°C | Potable water, foodstuffs, unchlorined drinking water |
|
| Special ethylene-propylene rubber | Special EPDM | -30°C~120°C | HVAC, chilled water, food stuffs & sugar juice |
|
| Viton | Viton | 0°C~200°C | Many aliphatic, aromatic and halogen hydrocarbons, hot gasses, hot
water, steam, inorganic acid, alkali |
|
|
|
|
