Actuator Diaphragm Control Valve With Positioner Pneumatic 3-Way
Flange Valve
Pneumatic 3-way ball valve can be divided into L type and T type. L
type 3-way ball valve is used for switching the flow direction of
media and making two orthogonal passages connected. Four-seat 3-way
ball valve has features including artistic appearance
Product Description:
Body material: SS316/SS304
Actuator material: SS304
Disc seal: PTFE/FPM
Stem seal: PTFE/FPM
Piston seal: FPM/NBR
Technical Parameter:
Connection size: DN10-DN80
Thread: 3/8" - 3"
Applicable Medium: Water, Neutral gas or liquid, alcohol, oil,
organic solvent, steam
Temperature of Medium: PTFE: -10℃ - +180℃, FPM: 10℃ - +100℃
Viscidity: Max 600mm³/s
Downstream installing / Upstream installing
Controlling medium: air/neutral gas
Controlling pressure: 0.3 - 0.8Mpa
Working pressure: 0-1.6Mpa
| Size Range | 3/4"~12", DN20~300 |
| Acting Mode | Multi-Spring diaphragm type |
| Working Pressure | 1.6, 4.0, 6.4MPa |
| Air Supply Pressure | 0.14, 0.16, 0.28, 0.4MPa |
| Lifespan | 1,000,000 (1 Million) Times |
| Temperature | -30°C~70°C |
| Body Material | SS304, SS316, SS316L, WCB |
| Number of Ways | 2 Way |
| End Connection | Flanged |
| Applicable Media | Control of Water, Air, Gas, Oil, Liquid, Steam, etc |
| Optional Accessories | Namur Solenoid Valve, Limit Switch, F.R.L, Position Indicator,
Manual Device |
| Application | Food & Beverage, Water & Wastewater, Ultra Pure Water,
Desalination, Chemical, Textile, Pharmaceutical, Pulp & Paper |
| |
Product Description
Pneumatic 3-way ball valve can be divided into L type and T type. L
type 3-way ball valve is used for switching the flow direction of
media and making two orthogonal passages connected. Four-seat 3-way
ball valve has features including artistic appearance and compact
and reasonable structure. It can not only switch the flow direction
of media, but also connect three passages, or close one passage
while making the other two passages connected. Thus, it can control
the convergence and diversion of the media in pipe flexibly.
Product features
1. Pneumatic 3-way flange ball valve adopts an integrated
structure, seal type of four valve seats and less flange
connection, ensuring high reliability and light weight.
2. Pneumatic 3-way ball valve spool is divided into T type and L
type, with long service life, large flow capacity and small
resistance.
3. The ball valve can be divided into single-acting and
double-acting type. The single-acting type has the feature that
once the power source has fault, the ball valve will be under a
state required by the control system.
A pneumatic valve for use in laminated plastic microfluidic
structures. This zero or low dead volume valve allows flow through
microfluidic channels for use in mixing, dilution, particulate
suspension and other techniques necessary for flow control in
analytical devices.
